BTGBK - LITE & BRITE, 20060
- MSDS: BTGBK
- Manufacturer: KEY TECHNOLOGY INC
- Product Name: LITE & BRITE, 20060
- National Stock Number: 6810-00N043322
Product Identification
Product ID:LITE & BRITE, 20060
MSDS Date:08/24/1991
FSC:6810
NIIN:00N043322
MSDS Number: BTGBK
Responsible Party
US
Emergency Phone: 713-579-0637; 800-535-5053
Info Phone: 713-579-0637
Preparer: PTW
Cage: 0CKF9
Contractor
Telephone: 713-579-0637
Cage: 0CKF9
Ingredients
PERBORIC ACID, SODIUM SALT, TETRAHYDRATE; (SODIUM PERBORATE
CAS: 10486-00-7
RTECS: SC7350000
Fraction By Weight: 20-40%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) 1908 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY BE CORR TO EYES & MUC MEMB.
EMESIS OR GASTRIC LAVAGE, MUST CONSIDER POSS ESOPHAGEAL PERFORATION
DUE TO RE- EXPOSURE TO CORRS. DECOMP PRODS MAY INCL PEROXIDE &
BORATE. SYSTEMIC EFTS ARE UNLIK ELY BUT WOULD BE THOSE OF BORIC
ACID. TREATMENT IS SYSTOMATIC & INCLUDES DECONTAM, SUPPORT OF
CIRCULATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION TO SKIN, EYES AND MUCOUS MEMBRANES.
POSSIBLY CORROSIVE IF LEFT UNWASHED.
Medical Cond Aggravated by Exposure:UNKNOWN.
First Aid
First Aid:EYES:WASH WITH FRESH WATER FOR AT LEAST 15 MINUTES. HOLD
EYELIDS OPEN. DO NOT RUB EYELIDS. GET MEDICAL ATTENTION, BUT WASH
EYES FIRST. SKIN:WASH WITH SOAP AND WATER UNTIL NO LONGER SLICK. IF
IRRITATIO N PERSISTS, GET MEDICAL ATTENTION. INHAL:REMOVE TO FRESH
AIR. GET MEDICAL ATTENTION. INGEST:DRINK LARGE QUANTITIES OF WATER
OR MILK. CALL A PHYSICIAN.
Fire Fighting
Extinguishing Media:WATER, WATER FOG MAY BE USED.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . PRODUCT IS AN OXIDIZER. DO NOT ENTER ANY ENCLOSED FIRE
SPACE W/OUT PROPER PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:DECOMPOSES WITH LIBERATION OF HEAT AND
OXYGEN WHICH MAY INTENSIFY FIRE IN COMBUSTIBLE SURROUNDINGS.
Accidental Release
Spill Release Procedures:SWEEP UP MATERIAL INTO APPROVED DOT CONTAINER,
DILUTE WITH LARGE QUANTITY OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID HEAT & MOISTURE. KEEP WELL
CLOSED IN A COOL, DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF TLV
EXCEEDED.
Ventilation:GENERAL MECHANICAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:EMERGENCY EYE WASH AND DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:T6
Appearance and Odor:WHITE POWDER, ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:EXCESSIVE TEMPERATURES.
Hazardous Decomposition Products:HYDROGEN PEROXIDE, OXYGEN.
Disposal
Waste Disposal Methods:DISPOSE OF AT AN APPROVED FACILITY IN ACCORDANCE
WITH APPLICABLE FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.